Zinc shot 0.6-1.2mm
Home   >   Products   >   Abrasive
Zinc shot
  • Zinc shot
  • Zinc shot
  • Zinc shot
  • Zinc shot
Zinc shot Zinc shot Zinc shot Zinc shot

Zinc shot

Product Features:

    The product is widely used in surface deburring, surface leveling, and brightening processing of aluminum alloys, zinc alloys, copper parts, stainless steel castings, etc.

SpecificationsΦ0.6mm-Φ2.0mm

Products

Zinc Shot

Shape

Cut wire shot/Shot

Chemical Composition

Zn≥99%

Hardness

45-50HV

Tensile Intensity

90-120Mpa

Durability

6000 Times

Microstructure

Deformed α

Density

7.1g/cm3

Bulk Density

4.1g/cm3

The product is widely used in surface deburring, surface leveling, and brightening processing of aluminum alloys, zinc alloys, copper parts, stainless steel castings, etc. It can improve the fatigue and corrosion resistance of workpieces, solve surface defects of castings, and make the product surface whiter and brighter.

Production process: Developed using processes such as wire drawing, cutting, and rounding.

Characteristic

1. Uniform composition, fine particle size, moderate hardness, and long service life.

2. The specific gravity is close to that of steel with low hardness, so it can not only remove large burrs on the surface of the product without wear, but also form a anti-corrosion and rust proof layer on the metal surface

3. Different from aluminum abrasives, the ignition point of dust is low and safe to use. And it has a good whitening effect on the surface of the workpiece.


Contact Us
  • Tel: +86 543 4578 888
  • Tel: +86 543 4288 886
  • Fax: +86 543 4579 617
  • E-mail: becky@kai-tai.com.cn
  • Add: Qingyang, Zouping Town, Shandong Province, China
Inquiry List
Get In Touch

Copyright © SHANDONG KAITAI GROUP CO., LTD. All Rights Reserved
Technical Support:

Inquiry
Inquiry