Aluminum Shot
Home   >   Products   >   Abrasive
Aluminum Shot
  • Aluminum Shot
  • Aluminum Shot
  • Aluminum Shot
  • Aluminum Shot
Aluminum Shot Aluminum Shot Aluminum Shot Aluminum Shot

Aluminum Shot

Product Features:

    Aluminum shot are refined using processes such as repeated drawing, cutting, and grinding of aluminum ingots containing 99% aluminum. Bright and cylindrical in appearance, suitable for surfaces of aluminum, zinc, or thin-walled workpieces.

Aluminium shot

Specifications:Φ0.6mm-Φ2.0mm

Products

Aluminium Shot

Shape

Cut wire shot/Shot

Chemical Composition

Al≥99%

Hardness

45-50HV

Tensile Intensity

80-240Mpa

Durability

6500 Times

Microstructure

Deformed α

Density

2.7g/cm3

Bulk Density

1.5g/cm3

Aluminum shot are refined using processes such as repeated drawing, cutting, and grinding of aluminum ingots containing 99% aluminum. Bright and cylindrical in appearance, suitable for surfaces of aluminum, zinc, or thin-walled workpieces.

Widely used for surface finishing treatment of aluminum castings, copper and zinc castings, sandblasting and polishing of various metal surfaces, removing burrs from cast workpieces, sandblasting and polishing of blade surfaces and cast product surfaces. It can make the product flat, smooth, shiny, and achieve whitening effect. At the same time, aluminum shot can be mixed with stainless steel shot to achieve a whiter and brighter surface of the workpiece.

Features:

1. Aluminum pellets have moderate hardness and are corrosion-resistant. They can reduce surface wear of the product while also whitening and brightening the surface of the workpiece, without producing side effects such as rust;

2. The incision is flat, the appearance is bright, and after multiple screenings, the product particle size is uniform

3. The effect of handling product appearance is very good

It should be noted that compared to other metal abrasives, aluminum shot have active chemical properties. Safety should be taken into account during production, storage, and use to avoid oxidation or contamination. Aluminum shot blasting operations can generate aluminum dust, and excessive concentration of aluminum dust can lead to explosion and safety accidents. So during shot blasting, it is necessary to control the temperature well, and do a good job of exhaust and dust removal. Install explosion-proof dust collectors to avoid high aluminum powder concentration and prevent explosion accidents.


Contact Us
  • Tel: +86 543 4578 888
  • Tel: +86 543 4288 886
  • Fax: +86 543 4579 617
  • E-mail: becky@kai-tai.com.cn
  • Add: Qingyang, Zouping Town, Shandong Province, China
Inquiry List
Get In Touch

Copyright © SHANDONG KAITAI GROUP CO., LTD. All Rights Reserved
Technical Support:

Inquiry
Inquiry